View W1210F900-RB-10_8677761.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

(a) (c) (b) (e) (d) 1. part no. expression : (b) dimension code (c) material code (a) series code 2. conf igurat ion & di me ns ions : 4. mate ri als : superworld electronics (s) pte ltd 3. sche mati c : (e) r : tape & reel (f) rated current : b = 200ma wirewound type common mode filter pg. 1 note : specifications subject to change without notice. please check our website for latest information. 20.05.2014 0.90 max. 0.35 0.1 1.00 0.2 d a unit:m/m 0.03 min. b 0.35 0.1 b c d1 d2 e c 2 a c b e d2 d2 d1 d1 1 43 1.20 0.2 a pcb pattern 1 43 2 h l g1 g2 (f) (d) impedance code : 900 = 90 ? (g) 10: standard (g) w 1 2 1 0 f 9 0 0 - r b - 0.65 ref. g1 0.30 ref. g2 1.10 ref. h 1.55 ref. l 1 43 2 11 ~ 99 : internal control number w1210 series side view top view (a) core (c ) te rm in al (d ) core (b) wire
superworld electronics (s) pte ltd 6. electrical characteristics : note : specifications subject to change without notice. please check our website for latest information. pg. 2 20.05.2014 wirewound type common mode filter w1210f500-rb-10 50 25% 100 0.30 50 250 125 10m part no. test (mhz) frequency ( ? ) impedance rated voltage (vdc) (ma) max. dcr ( ? ) current rated min. (vdc) withstand voltage ir ( ? ) 100 W1210F900-RB-10 90 25% 50 0.40 200 125 10m w1210f670-rb-10 67 25% 100 0.30 50 250 125 10m w1210 series b) storage condition (component in its packaging) a) operating temp. : -40 c to 125 c 5. ge ne ral sp ecif ication : i) temperature : -10 to 40 c ii) humidity : 60%
superworld electronics (s) pte ltd note : specifications subject to change without notice. please check our website for latest information. pg. 3 20.05.2014 7. characteristic curves : wirewound type common mode filter 1 10 100 1000 10000 frequency(mhz) 0.1 1 10 100 1000 impedance(ohm) w1210f500-rb-10 common mode normal mode 1 10 100 1000 10000 0.1 1 10 100 1000 w1210f670-rb-10 common mode normal mode 1 10 100 1000 10000 0.1 1 10 100 1000 W1210F900-RB-10 common mode normal mode frequency(mhz) impedance(ohm) frequency(mhz) impedance(ohm) w1210 series
superworld electronics (s) pte ltd note : specifications subject to change without notice. please check our website for latest information. pg. 4 20.05.2014 wirewound type common mode filter w1210f500-rb-10 7-1. insertion loss test w1210 series
superworld electronics (s) pte ltd note : specifications subject to change without notice. please check our website for latest information. pg. 5 20.05.2014 wirewound type common mode filter w1210f670-rb-10 w1210 series
superworld electronics (s) pte ltd note : specifications subject to change without notice. please check our website for latest information. pg. 6 20.05.2014 wirewound type common mode filter W1210F900-RB-10 w1210 series
8. soldering and mounti ng : note : specifications subject to change without notice. please check our website for latest information. superworld electronics (s) pte ltd pg. 7 20.05.2014 wirewound type common mode filter e) use a 20 watt soldering iron with tip diameter of 1.0mm products attachment with soldering iron is discouraged due to the inherent process control limitations. in the event that a soldering iron must be employed the following precautions are recommended. recommended temperature profiles for re-flow soldering in figure 1. mildly activated rosin fluxes are preferred. our terminations are suitable for all wave and re-flow soldering systems. if hand soldering cannot be avoided, the preferred technique is the utilization of hot air soldering tools. 8-1.1 solder re-flow : f) limit soldering time to 4-5 secs. d) 1.0mm tip diameter (max) b) 355 c tip temperature (max) c) never contact the ceramic with the iron tip 8-1.2 soldering iron (figure 2) : a) preheat circuit and products to 150 c. note : 8-1. soldering soldering 20~40s 60~150s time(sec.) figure 1. re-flow soldering : 3 times max. temperature c 150 60~180s 4 80s max. 25 tp(260 c/40s max.) 200 217 preheating natural cooling g rad ual cooling temperature c over 1min. figure 2. iron soldering times: 1 times max. preheating 150 350 soldering cooling natural within 4~5s w1210 series
d1:1 0.1 f:3.5 0.05 p2:2 0.05 p e:1.75 0.1 po:4 0.1 size w:8.0 0.1 bo ko section a-a ao a t a d:1.5+0.1 series 1210 ko(mm) 1.05 0.10 bo(mm) 1.50 0.10 ao(mm) 1.25 0.10 p(mm) 4.0 0.1 t(mm) 0.22 0.05 d(mm) 178.0 2.0 9-2 tape dimension / 8mm 7" x 8mm d c b r0.5 r1.9 1 2 0 7" x 12mm 2 0.5 60.0 2.0 r10.5 13.5 0.5 7" x 8mm 9.0 0.5 13.5 0.5 type a(mm) c(mm) b(mm) 9-1. reel dimension 9. packaging information : a w1210 9-3. packing quantity carton middle box chip / reel series inner box 150000 75000 3000 15000 w1210 note : specifications subject to change without notice. please check our website for latest information. superworld electronics (s) pte ltd pg. 8 20.05.2014 wirewound type common mode filter w1210 series
superworld electronics (s) pte ltd note : specifications subject to change without notice. please check our website for latest information. pg. 9 20.05.2014 wirewound type common mode filter 9-4. tearing off force base tape top cover tape 165 to 180 f teari ng speed in the arrow direction under the following conditions. the force for tearing off cover tape is 15 to 80 grams 45~85 5~35 860~1060 room humidity ( c) room temp. (%) (hpa) room atm 300 (mm/min) w1210 series a) recommended products should be used within 12 months from the time of delivery. b) the packaging material should be kept where no chlorine or sulfur exists in the air. b) the use of tweezers or vacuum pick up is strongly recommended for individual components. c) bulk handling should ensure that abrasion and mechanical shock are minimized. a) products should be handled with care to avoid damage or contamination from perspiration and skin oils. to maintain the solderabililty of terminal electrodes : 1. storage conditions : application notice 2. transportation :

▲Up To Search▲

Price & Availability of W1210F900-RB-10

	To Download W1210F900-RB-10 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .